Home :: RF Combiners :: 1000W Teflon Combiner PCB Only

1000W Teflon Combiner PCB Only

1000W Teflon Combiner PCB Only
 
(0 reviews)  

SKU
SPL800
Weight
0.30 lbs
Our price:
$40.00
Click here to be notified of price drops of this item
 
Qty
Click here to be notified when this item is nearly out of stock

Designed for FM radio transmitters, these Teflon splitter combiner assemblies are ideal for splitting and combining FM signals in the 88-108MHz frequency range.

  • Specifically designed for combining 2 RF amplifiers or driving 2 antennas.
  • 1000 watt power rating.
  • 0.12dB maximum power loss.
  • PCB measures 4.94 inches x 3.18 inches.
  • 250 watt 100 ohm power balancing resistor.
  • PCB is Teflon with ceramic filler; 2oz copper. Tightly controlled dielectric constant.
  • Non-reactive; this means you can use 3 boards to create a 4 way combiner!!!!
  • Guaranteed not to burn under high SWR conditions.
  • The splitter combiner set includes 2 Teflon Combiner PCB's and 2 resistors as shown here.

    (1) The axial leaded resistor 100 ohms 5 watts is ideal for low power situations like at the input of a pair of pallet amplifiers.(2) The 250 watt 100 ohm flanged resistor is intended for use at high power.

     

     

  • Splitter combiners are useful for combining RF amplifiers to obtain high power levels. They are also used on multi-bay antenna setups.
  • This combiner will handle up to 1000 watts because of its extremely low loss characteristics and Teflon construction.
  • These combiners should not be used to combine 2 600 or 700W Pallets. We are working on a new design for this purpose.
  • These combiners and flange mount 100 ohm resistor must be secured to a heat sink to insure a good ground and to keep the pcb cool. The back side of the pcb can be coated with a very thin layer of heat sink compound. All mounting holes should be used.
  • The resistors are not attached to the PCB. We leave this job to the end user.
  • An AutoCad/DXF file showing the mounting hole locations is available upon request. This page is under construction.
  • The table below summarizes the typical performance of our splitter/combiners. You will find that our combiners offer state of the art performance at a low price. Who else sells a high power combiner on a Teflon/ceramic substrate?
     
    Freq Input Return Loss Output Return Loss Power Loss
    88 -34.46dB -22.44dB 0.108dB
    98 -34.99dB -27.14dB 0.092dB
    108 -39.33dB -23.92dB 0.113dB

 

1000W Teflon Splitter/Combiner Set
$95.00
RG213 Coax Cable
$1.65
BLF574 600W FM Pallet Amplifier
$495.00
170-230MHz 400W Band III TV LDMOS 50V
$559.00
SD2941-10
$89.00
NXP CGD1042H
$39.00
BLF188XR 88-108MHz 1000W Planar FM Pallet
$599.00
170-230MHz 15W Band III VHF TV Driver Milled Housing
$319.00
3 Way VHF Power Divider 5KW
$495.00
There have been no reviews