Home :: FM Low Pass Filters :: LPF Only (FM) :: 800W FM LPF


(0 reviews)  

0.50 lbs
Our price:
Click here to be notified of price drops of this item
Click here to be notified when this item is nearly out of stock
A high quality, high performance and competitively price low pass filter for all 50 ohm pallet amplifiers up to and including 800W continuous power.
  • 86-110MHz
  • 0.25 dB insertion loss maximum; 0.20 dB typical.
  • -25dB return loss maximum; -28dB typical.
  • Metal clad silver teflon caps from Semco.
  • #8 Awg Inductors.
  • -60dB rejection at 176MHz. That's the 1st harmonic of 88MHz
  • Size: 3 inches wide x 7 inches long.
  • Each unit is sweep tested on an HP 8753D network analyzer to meet our specifications 
  • .25dB maximum insertion loss, better than -20dB return loss from 88-108MHz. Maximum insertion loss occurs at 108MHz.
  • RF connectors are not included. A coax can be soldered directly or the product can be installed in an enclosure (customer supplied)
  • Mounts to customers chassis with 8-32 screws. 3/8 inch PCB standoffs or washers are required between the bottom of the PCB and chassis to prevent shorting of the inductors. Installing the filter in a metal chassis is suggested to provide shielding and good thermal conductivity in high power installations.
  • This low pass filter is intended for use in 50 ohm systems only.
  • S-Parameters 75-125MHz Click Here .
  • S-Parameters 40-1000MHz Click Here .


BLF178P 1800W FM Pallet Amplifier
UHF TV Panel Antenna
13.5" Bonded Heat Sink
SD2942 350W FM Pallet Amplifier
BLF177 150W PA Module
MeanWell 600W 48V DC Power Supply
250W FM LPF Enclosed
CUI Devices 48VDC FAN 201CFM
BLF278 300W FM Transistor P1dB
There have been no reviews