2000W Teflon Quadrature Combiner PCB Only

Designed for FM radio transmitters, these Teflon splitter combiner assemblies are ideal for splitting and combining FM signals in the 88-108MHz frequency range.

• 90 degree combiner .
• 90 +/- 0.5 degree phase shift between input ports at 98MHz.
• 2000 watt power rating.
• 0.15dB maximum power loss.
• PCB measures 3.5 inches x 11.0 inches
• PCB accepts standard Anaren or Florida RF labs 500 watt 100 ohm microwave resistor.
• PCB is 0.093 inch Teflon with ceramic filler; 2oz copper. Tightly controlled dielectric constant.
• Performs just like an Anaren 3dB hybrid coupler.
• Input return loss: better than -30dB
• Output return loss: better tham -25dB

• Available on or before Feb 01 2007. The photo will be updated soon.
• This combiner is ideal for combining the outputs of our 600W and 700W FM pallet amps.
• 90 degree quadrature combiners are the best way to combine 2 Identical RF amplifier modules. In phase Wilkinson splitters are no longer recommended for combining our 300W, 350W, 600W and 700W PA modules. The problem with "in phase" splitters is they allow the PA module impedances to interact with each other. This interaction can cause power loss and efficiency problems when operating at very high power levels. The 90 degree "quadrature" combiner cancels all of these reactance.
• In a quadrature combiner the PA modules will combine perfectly when both modules have the same input and output impedances. The input and output impedance of the combiners will be perfect 50 ohms. (well we think -25dB return loss is really good)
• This combiner will handle up to 2000 watts because of its extremely low loss characteristics and Teflon construction.
• These combiners and flange mount 100 ohm resistor must be secured to a heat sink to insure a good ground and to keep the pcb cool.
• An AutoCad/DXF file showing the mounting hole locations is available upon request.